China's RoHS regulations are about to begin substantive supervision

Although the “Measures for the Control of Pollution Control of Electronic Information Products”, known as China’s RoHs, was announced two years ago and implemented in March last year, the Chinese government has adopted a very cautious “two-step” approach, first. Step companies only need to disclose relevant environmental information in a self-declared manner. The government does not take substantial penalties for products that exceed the limits of toxic and hazardous substances. Therefore, even if the electronics manufacturer does not perform any action on material selection, What is the impact, which also makes some enterprises feel lucky, thinking that the final result will be thunder and heavy rain. However, with the introduction of the "Electronic Information Products Pollution Control Key Management Cataloging Procedures", China RoHS officially entered the second At the stage, this also marks that the government's substantive supervision will not be far behind.

According to the provisions of the management measures, China will adopt a “catalog system” to gradually start to supervise electronic information products, so which products will be listed in the regulatory directory has become a topic of great concern to everyone. Earlier this month, the Ministry of Industry and Information Technology officially announced the "Development Procedure for the Key Management Catalogue of Pollution Control of Electronic Information Products" on its official website in the form of Announcement No. 6 of 2008, which opened the door to the development of the catalogue. Obviously the government has begun to work. Review specific products and prepare them for the program.

From the perspective of the published procedures, the list of products mainly includes five categories of products:

1. Products and materials with large output and wide application, which contain toxic and harmful substances that are threatening to the environment and have great damage to human health;

2. Products containing toxic and hazardous substances replaced by non-toxic and harmless substances or low-toxic and low-harm substances have no obstacles and are economically viable;

3. Although it is impossible to replace toxic and hazardous substances, it can meet the requirements of the toxic and hazardous substances limit standards, and the production of products that meet the limit standards has no technical obstacles and is economically viable.

4. Products that are restricted by serious pollution are clearly defined in international conventions.

5. Other products that should be included in the key management directory management.

The products listed in the catalogue are first proposed by the relevant government agencies and industry associations to the Ministry of Industry and Information Technology. The Ministry of Industry and Information Technology submits the list of recommendations to the Inter-Ministerial Working Group on Pollution Control of Electronic Information Products to determine the list of recommendations, and then The specialized expert advisory committee evaluates the relevant content of technical, economic and product compulsory certification. The experts of the advisory committee are recommended by relevant government departments, industry associations, enterprises and other units. According to the evaluation report of the Expert Advisory Committee, the Ministry of Industry and Information Technology has confirmed the draft key management catalogue batches, publicly solicited opinions on the website of the Ministry of Industry and Information Technology (one month), and finally revised according to the collected opinions and suggestions, and then The final list will be finalized and announced with other relevant ministries.

In order to help electronic manufacturers have sufficient preparation, for the products entering the catalog, the program usually reserves six months or more after the announcement to formally implement the restrictions and prohibitions. However, for electronics manufacturers, green manufacturing is the trend of the times, and must be prepared as soon as possible!

USB Countdown Timer

Function description

The socket is ordinary converter,with two output 5V2A power USB power supply at the same time,can be very convenient in use electrical appliances and recharge the equipment at the same time,such as digital products like Iphone Ipad,MP3,MP4 etc.The charge apply to full range of international AC output,no-load power consumption less than 0.3W,with short circuit,overload,over-voltage protection,can be convenient for your life and save more energy

Timer Control Time Adgustment

1.Press the power switch 1 time,the 1HOUR LED will light on.The Timer into ON mode,USB and control socket output ON .

2.Continuously press the power switch the LED light on,the Countdown mode and LED light on will cycle change from 1HR,2HR,4HR,6HR,8HR,10HR.

3.Choose you need countdown time mode,the mode LED will lighto on,start countdown until countdown time finish,the control output and USB change to OFF

4.Then the countdown is start,The Time indicate LED will from high to low auto change until Countdown finish off.

Failure analysis:

1.check whether the power supply connection is good

2.check whether the USB cable is loosen

Warning Note:

1.Use indoor and dry location ONLY

2.The load max does not exceed 15A 3600W

3.This product does not convert voltage please do not miss use DO NOT exceed the maximum loading of 3600 Watts 15A

4.Always have earth connection for safety reason

5.If in doubt please consult with a qualified electrician

USB countdown timer, USB countdown timer socket, USB timer, USB charger timer, USB timer socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com