21ic News Kyocera Connector Products Co., Ltd. (hereinafter referred to as "Kyocera Connector Products") has developed the 5236 series of mobile communication smart card microSIM dedicated connectors for mobile terminals such as smartphones and tablets, which will be released in January 2014. .
This article refers to the address: http://
microSIM card connector 5236 series
In recent years, with the miniaturization, thinning, and multi-functionality of mobile terminals such as smartphones and tablet computers, the installed components have to be smaller than ever. In this context, small microSIM cards have been widely favored by the market.
Kyocera Connector Products The newly developed micro-SIM card connector 5236 series adopts a spiral discharge structure and is a Push-Push type connector with a good operating feel. The product is small in size and saves installation area. The product features a design that prevents the card from being mis-inserted or accidentally popped, with a switch that detects if the card has been inserted. In addition, the 5236 series has another dual-card style that allows two cards to be inserted at the same time. For users who need to use two cards, this type of connector does not need to change the card every time, which saves the user the cumbersome steps and saves installation space.
This product from Kyocera Connector Products Co., Ltd. not only enriches the SIM card-specific connector product group, but also contributes to the high functionality and miniaturization of mobile terminals such as smartphones and tablets.
Product introduction
1. Low back space design
Single piece, product thickness 1.3mm, width 14.4mm, length 16.2mm
Double card type, product thickness 1.75mm, width 16.28mm (including end tail), length 17.22mm
2. Standard type, adopting Push-Push type plugging and unplugging method.
For the standard type, the card insertion method uses the Push-Push type of a spiral-type mechanism with a good hand.
3. Adopt a design that prevents the card from being mistakenly inserted or accidentally popped.
The shield construction prevents accidental insertion and accidental ejection of the card.
4. Switch with detectable card insertion or not
With a switch that detects if the card is inserted, the power can be saved with the card inserted correctly.
5. The card has a pop-up amount of 3.8mm and has good operability.
6. The number of insertions and removals can be guaranteed 3,000 times.
7. Corresponding to the automatic installation of embossed tape packaging.
8. Corresponding to RoHS directive, halogen-free requirements.
9. Product specifications
Number of poles | 8 pole / 16 pole | Operating temperature range | -40 to +85 °C |
Pole spacing | 0.7mm | Rated current | DC 0.5A/Contact |
Board height | 1.3mm/2.75mm | Rated voltage | DC 5V/Contact |
installation method | Standard type | Withstand voltage | AC 500Vrms/min. |
Guaranteed the number of plugs | 3,000 times | Material | Copper alloy / heat resistant resin / SUS |
Easy Electronic Technology Co.,Ltd , https://www.pcelectronicgroup.com