Model NO.: LXW-511M/Z-15GQ-B
Certification: ISO9001, CCC
Operation Speed: 0.01mm to 1m/S
Operation Frequency: 240times/Min (Mechanical) 20times/Min(Electrical)
Version: with Cone Bumper
Contact Resistance: 15m Ohm
Contact Capacity: 15A 380VAC/220VAC 0.3A 220VDC
Ambient Humidity: 90% Max
Ambient Temperature: -10~+80centigrade
Vibration Resistance: 10-55Hz, 1.5mm Double Amplitude
Electrical Specification: AC380V, 220V/1.5A DC220V/0.3A
Shock Resistance: Destructioni:100m/S2; Malfunction:300m/S2
Trademark: C. lin
Origin: China
HS Code: 8536500000
Model NO.: LXW-511M/Z-15GQ-B
Certification: ISO9001, CCC
Operation Speed: 0.01mm to 1m/S
Operation Frequency: 240times/Min (Mechanical) 20times/Min(Electrical)
Version: with Cone Bumper
Contact Resistance: 15m Ohm
Contact Capacity: 15A 380VAC/220VAC 0.3A 220VDC
Ambient Humidity: 90% Max
Ambient Temperature: -10~+80centigrade
Vibration Resistance: 10-55Hz, 1.5mm Double Amplitude
Electrical Specification: AC380V, 220V/1.5A DC220V/0.3A
Shock Resistance: Destructioni:100m/S2; Malfunction:300m/S2
Trademark: C. lin
Origin: China
HS Code: 8536500000
Micro Switch (LXW-511M/Z-15GQ-B)General Introduction
Our C. LIN brand micro switch is a generic term used to refer to an electric switch that is able to be actuated by very little physical force. They are very common due to their low cost and extreme durability, typically greater than 1 million cycles and up to 10 million cycles for heavy duty models. This durability is a natural consequence of the design. Internally a stiff metal strip must be bent to activate the switch. Common applications of micro switches include computer mouse buttons and arcade game joysticks and buttons. Micro switches are commonly used in tamper switches on gate valves on fire sprinkler systems and other water pipe systems, where it is necessary to know if a valve has been opened or shut.
Features:
Plastic closure, single air-space and with alternative contacts, with different operating elements on the switch, limit switch to be installed with three terminals. Spring handle and pushbutton versions are available. The switches can be installed in any desired position.
Relevant Standad: EN 60947-1
General purpose micro switches may be used in AC control circuits of 50/60Hz, with a voltage up to 380V and a rated control capac ity
Of 100VA or in DC control circuits with a voltage up to 220V and rated control capacity of 10W.
Technical Specification
| Model | Operating Force max | Pretravel max | Overtravel min | Operating Position |
| LXW-511D | 3.4N(0.35kgf) | 0.4mm | 1.6mm | 21.5±0.5mm |
| LXW-511G1 | 1N(0.1kgf) | 7.1mm | 4mm | 30.2±0.8mm |
| LXW-511G2 | 1.6N(0.16kgf) | 2.7mm | 2.4mm | 30.2±0.4mm |
| LXW-511M | 3.4N(0.35kgf) | 0.4mm | 5.6mm | 21.8±0.8mm |
| LXW-511N1 | 0.7N(0.07kgf) | 10mm | 5.6mm | 19±0.8mm |
| LXW-511N2 | 1.6N(0.16kgf) | 5mm | 2mm | 19±0.4mm |
| LXW-511Q1 | 3.4N(0.35kgf) | 0.4mm | 3.58mm | 33.4±1.2mm |
| LXW-511Q2 | 3.4N(0.35kgf) | 0.4mm | 3.58mm | 33.4±1.2mm |
| LXW-511Z | 3.4N(0.35kgf) | 0.4mm | 0.13mm | 15.9±0.4mm |
| LXW-515B | 1.6N(0.16kgf) | 2.7mm | 2.4mm | 43.1±0.8mm |
| LXW-515C | 3.4N(0.35kgf) | 0.1mm | 1.6mm | 28.2±0.5mm |
| LXW-515R | 1N(0.1kgf) | 20mm | 5.6mm | 19±0.4mm |
| LXW-515S | 3.0N(0.3kgf) | 4mm | 1.6mm | 28.6±0.8mm |
| LXW-515X | 3.0N(0.3kgf) | 4mm | 1.6mm | 17.4±0.8mm |
| International Model | C. lin Factory Model | OF max. | PT max. |  OT min. | OP |
| Z-15GD-B |  LXW-511D |  3.4N(0.35KGF) | O. 4 mm | 1.6 mm |      21.5± 0.5mm |
| Z-15GW2-B |  LXW-511G1 | 1.6N(0.16KGF) | 7.1 mm | 4 mm | 30.2± 0.8mm |
| Z-15GW22-B |  LXW-511G2 | 1.6N(0.16KGF) | 2.7 mm | 2.4 mm | 30.2± 0.4mm |
| Z-15GQ-B |  LXW-511M | 3.4N(0.35KGF) | O. 4 mm | 5.6 mm |      21.8± 0.8mm |
| Z-15GW-B |  LXW-511N1 |  3.4N(0.35KGF) | 10 mm | 5.6 mm | 19± 0.8mm |
| Z-15GW21-B |  LXW-511N2 | 0.7N(0.07KGF) | 5 mm | 2 mm | 19± 0.4mm |
| Z-15GQ22-B |  LXW-511Q1 | 1N(0.1KGF) | O. 4 mm | 3.58 mm |      33.4± 1.2mm |
| Z-15GQ21-B |  LXW-511Q2 | 3.4N(0.35KGF) | O. 4 mm | 3.58 mm | 33.4± 1.2mm |
| Z-15G-B |  LXW-511Z |  3.4N(0.35KGF) | O. 4 mm | O. 13 mm | 15.9± 0.4mm |
| Z-15GW2277-B |  LXW-511B | 3.4N(0.35KGF) | 2.7 mm | 2.4 mm |      43.1± 0.8mm |
| Z-15GS-B |  LXW-511C | 1.6N(0.16KGF) | O. 1 mm | 1.6 mm | 28.2± 0.5mm |
| Z-15HW52-B |  LXW-511R | 1N(0.1KGF) | 20 mm | 5.6 mm | 19± 0.4mm |
| Z-15GL2-B |  LXW-511S |  3.0N(0.3KGF) | 4 mm | 1.6 mm |      28.6± 0.8mm |
| Z-15GL-B |  LXW-511X | 3.0N(0.3KGF) | 4 mm | 1.6 mm | 17.4± 0.8mm |
Dimension
Micro Switch (LXW-511M/Z-15GQ-B)
General Introduction
Our C. LIN brand micro switch is a generic term used to refer to an electric switch that is able to be actuated by very little physical force. They are very common due to their low cost and extreme durability, typically greater than 1 million cycles and up to 10 million cycles for heavy duty models. This durability is a natural consequence of the design. Internally a stiff metal strip must be bent to activate the switch. Common applications of micro switches include computer mouse buttons and arcade game joysticks and buttons. Micro switches are commonly used in tamper switches on gate valves on fire sprinkler systems and other water pipe systems, where it is necessary to know if a valve has been opened or shut.
Features:
Plastic closure, single air-space and with alternative contacts, with different operating elements on the switch, limit switch to be installed with three terminals. Spring handle and pushbutton versions are available. The switches can be installed in any desired position.
Relevant Standad: EN 60947-1
General purpose micro switches may be used in AC control circuits of 50/60Hz, with a voltage up to 380V and a rated control capac ity
Of 100VA or in DC control circuits with a voltage up to 220V and rated control capacity of 10W.
Technical Specification
| Model | Operating Force max | Pretravel max | Overtravel min | Operating Position |
| LXW-511D | 3.4N(0.35kgf) | 0.4mm | 1.6mm | 21.5±0.5mm |
| LXW-511G1 | 1N(0.1kgf) | 7.1mm | 4mm | 30.2±0.8mm |
| LXW-511G2 | 1.6N(0.16kgf) | 2.7mm | 2.4mm | 30.2±0.4mm |
| LXW-511M | 3.4N(0.35kgf) | 0.4mm | 5.6mm | 21.8±0.8mm |
| LXW-511N1 | 0.7N(0.07kgf) | 10mm | 5.6mm | 19±0.8mm |
| LXW-511N2 | 1.6N(0.16kgf) | 5mm | 2mm | 19±0.4mm |
| LXW-511Q1 | 3.4N(0.35kgf) | 0.4mm | 3.58mm | 33.4±1.2mm |
| LXW-511Q2 | 3.4N(0.35kgf) | 0.4mm | 3.58mm | 33.4±1.2mm |
| LXW-511Z | 3.4N(0.35kgf) | 0.4mm | 0.13mm | 15.9±0.4mm |
| LXW-515B | 1.6N(0.16kgf) | 2.7mm | 2.4mm | 43.1±0.8mm |
| LXW-515C | 3.4N(0.35kgf) | 0.1mm | 1.6mm | 28.2±0.5mm |
| LXW-515R | 1N(0.1kgf) | 20mm | 5.6mm | 19±0.4mm |
| LXW-515S | 3.0N(0.3kgf) | 4mm | 1.6mm | 28.6±0.8mm |
| LXW-515X | 3.0N(0.3kgf) | 4mm | 1.6mm | 17.4±0.8mm |
| International Model | C. lin Factory Model | OF max. | PT max. |  OT min. | OP |
| Z-15GD-B |  LXW-511D |  3.4N(0.35KGF) | O. 4 mm | 1.6 mm |      21.5± 0.5mm |
| Z-15GW2-B |  LXW-511G1 | 1.6N(0.16KGF) | 7.1 mm | 4 mm | 30.2± 0.8mm |
| Z-15GW22-B |  LXW-511G2 | 1.6N(0.16KGF) | 2.7 mm | 2.4 mm | 30.2± 0.4mm |
| Z-15GQ-B |  LXW-511M | 3.4N(0.35KGF) | O. 4 mm | 5.6 mm |      21.8± 0.8mm |
| Z-15GW-B |  LXW-511N1 |  3.4N(0.35KGF) | 10 mm | 5.6 mm | 19± 0.8mm |
| Z-15GW21-B |  LXW-511N2 | 0.7N(0.07KGF) | 5 mm | 2 mm | 19± 0.4mm |
| Z-15GQ22-B |  LXW-511Q1 | 1N(0.1KGF) | O. 4 mm | 3.58 mm |      33.4± 1.2mm |
| Z-15GQ21-B |  LXW-511Q2 | 3.4N(0.35KGF) | O. 4 mm | 3.58 mm | 33.4± 1.2mm |
| Z-15G-B |  LXW-511Z |  3.4N(0.35KGF) | O. 4 mm | O. 13 mm | 15.9± 0.4mm |
| Z-15GW2277-B |  LXW-511B | 3.4N(0.35KGF) | 2.7 mm | 2.4 mm |      43.1± 0.8mm |
| Z-15GS-B |  LXW-511C | 1.6N(0.16KGF) | O. 1 mm | 1.6 mm | 28.2± 0.5mm |
| Z-15HW52-B |  LXW-511R | 1N(0.1KGF) | 20 mm | 5.6 mm | 19± 0.4mm |
| Z-15GL2-B |  LXW-511S |  3.0N(0.3KGF) | 4 mm | 1.6 mm |      28.6± 0.8mm |
| Z-15GL-B |  LXW-511X | 3.0N(0.3KGF) | 4 mm | 1.6 mm | 17.4± 0.8mm |
Dimension
Antenk Card SIM Connectors are precision engineered PCB mount connectors developed to mate with the plated fingers of a printed circuit daughter board. Their bifurcated, cantilever contacts are set in a dual readout configuration and they offer a reliable connection for a wide range of PCB thicknesses. Antenk`s sturdy solder tails with tapers allow easy insertion and rugged durability
SIM Card Connectors Introduction
SIM card connectors designed for applications requiring two or more pcb`s to be connected and readily removed.
As the market trends towards versatility, customers need flexible high-speed edge card receptacles that can be utilized across as many platforms as possible. Through creating industry standards by collaborating with customers, Antenk is committed to offering a wide range of edge card receptacles that can be used in multiple applications across one solution.
Flexible Solutions Solving Many Problems
Antenk Edge Card Connector Solutions solve many problems across a wide range of circuit sizes, configurations, pitch, and PCB-attach terminations. Scroll down list to see more on our full line of edge card solutions.
Types of Card Edge Connectors
AMC / AMC B+ Connectors
Micro TCA Connectors
PCI Express / PCI Connectors
Standard Card Edge Connectors
Edgecard PCB Connectors Range
SIM Card Connector,Pci Card Edge Connector,Pitch Card Edge Connector,Pcb Edge Card Connector,AMC / AMC B+ Connectors,Micro TCA Connectors,PCI Express / PCI Connectors,Standard Card Edge Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.atkconnectors.com