Modern lighting tomorrow star LED bulb driver power supply has the following requirements:
(1) High efficiency and low heat
Because the power supply is usually built-in, together with the LED bulb beads, the heat generated by the power supply and the LED chip will be superimposed. When the heat is generated and the balance is lost, the working temperature of the LED bulb is determined together, and the operating temperature of the LED chip determines the LED. The service life of the bulb;
(2) Long service life
According to the barrel theory, the shortest board determines how much water the barrel can hold, and the power supply is the shortest board that determines the life of the LED bulb, so the power supply is the key factor in determining the quality of the LED bulb.
(3) The current ripple amplitude is small;
The small current ripple amplitude not only improves the quality of the illumination, but also extends the life of the component, thus extending the life of the LED bulb.
(4) The current pulsation frequency is high;
If the current pulsation frequency is high, it will not make people notice the strobe of the light. Of course, a good LED bulb should have no large current ripple.
(5) High power factor
Increasing the power factor in the LED driving power source can improve the power utilization efficiency of the power grid equipment and reduce the power grid loss, thereby improving the utilization efficiency of the power grid.
(6) Electrical isolation
The LED drive power supply is powered by a higher voltage AC mains grid, but the LEDs operate at a lower safe voltage and need to be electrically isolated between them to comply with safety regulations to avoid electric shock.
(7) Protection function
Generally, there should be over temperature, over current and open circuit protection to comply with safety regulations, and multiple protections to avoid electric shock accidents.
(8) small size
Because the general LED bulb power supply is an integrated built-in power supply, only a small size is required to install.
(9) low cost
Low-cost and low-price will have a good market performance. This is a common law in the Chinese market. It is difficult to change in the short term, and LED lamps companies must adapt.
Author: Optoelectronics Technology Co., Ltd. Chengdu month towards Zhao Hui
UV Film Sheets
We all know that curved-edge phones look good, but they are not easy to protect. In order to prevent the mobile phone from being scratched, current mobile phone users like to stick a phone Screen Protector on the mobile phone screen.
With the development of the market, more and more users like mobile phones with curved screens. Unlike flat mobile phones, the screen protectors of curved screen mobile phones are not easy to buy or stick. The main reason is that the Tempered Glass Screen Protector of curved mobile phones is difficult to fit the height of the mobile phone screen. Then our TUOLI Uv Screen Protector is the best choice for full screen users.
Using the curing principle of the 30 UV lamp beads of the UV Curing Machine to scan the entire screen, the UV Screen Protection Film has the texture of tempered glass. The upper limit of the high temperature of the UV Machine is 60 degrees, has a good heat dissipation function, and has a time setting: 180 seconds. Exquisite and easy to operate, it can make the Screen Protective Film have high light transmittance and smoothness.
Uv Curing Film,Uv Screen Curing Film,Uv Protective Curing Film,Uv Glass Curing Screen Protector
Shenzhen TUOLI Electronic Technology Co., Ltd. , https://www.szhydrogelprotector.com