Smart Sockets Classification and Specifications

A smart outlet is a type of outlet that conserves electricity. Some high-end energy-saving outlets not only save electricity, but also protect electrical appliances (the protection of electrical appliances is mainly the function of clearing power garbage); in addition, there are lightning protection, short-circuit prevention, overload protection, leakage prevention, elimination of switching power supply and Electrical pulses generate electrical impulses and other functions.

Smart Sockets Classification and Specifications

Smart sockets belong to the emerging electrical components, and there are no clear standard specifications and definitions in the country. There are few products currently on the market, which can be divided into the following two major categories.

1. Programmable (PLC) automatic control of energy-saving converter

(1) The product is controlled by the programmable electrical appliance (PLc) automatic timing control to turn on and off the controlled appliance electrical appliances and office electrical appliances, and effectively eliminate the “zero power consumption standby” of the controlled appliances during the non-working hours.

(2) The product adopts seven key operation modes, with eight open and eight off programmable setting resources, and the control cycle is a daily control or cycle control cycle.

(3) The product adopts special high-efficiency energy-saving control technology and scheme, and its static power consumption and dynamic power consumption are both less than 20mW.

(4) The product power supply interface adopts a special “anti-misplugging” safety universal jack and a highly reliable and flexible phosphor bronze plug sleeve, which can ensure the safe and reliable power supply and use of electricity.

(5) The battery is used to keep the clock running, and the user-programmed timing program will not be lost due to power-off and power-down.

(6) The set program has clear and restore functions.

(7) The product has indicators for opening and closing.

(8) The product can be widely used in televisions, computers, air conditioners, humidifiers, drinking fountains, lighting, chargers and other household appliances and office equipment that require regular control of power-on and power-off.

2. Multiple circuit protection

(1) Lightning and surge protection:

1) The maximum surge current is 20KA or more.

2) Limit voltage ≤ soov or lower.

2) Alarm protection: LED digital current display and full current monitoring with alarm function.

(3) Filter protection: With a fine filter protection, the output is ultra-stable and pure power.

(4) Overload protection: Provides two-pole overload protection, which can effectively prevent problems caused by overload.

Smart Sockets are used for intelligent control of home appliance power supplies, which can effectively eliminate standby power consumption of home appliances. Smart Socket Panels also provide an On/Off button for manual operation.

Smart outlet parameters

(1) Panel specifications: 86mmX86mm.

(2) Installation hole distance: 60. 3mm.

(3) Depth: 29 mm.

(4) rated working current: 10A (AC220V/50Hz).

Smart socket installation

The smart socket installation follows these steps:

(1) Wire the correct marking on the back of the socket. ,

(2) Fasten the socket to the wall-mounted bottom box using two M4 X 25 size screws.

(3) Install the socket panel.

(4) Install the socket housing.

Smart outlet wiring

The smart socket's strong electrical connection (such as phase, neutral, and ground) is the same as the traditional socket; the smart socket has only one communication bus interface COM (8P8C), and the crystal head plugs into the communication bus interface COM.