Li Bingjie, chairman of LED Epistar faucet (2448), recently pointed out that the new model of LEDTV brand will start shipping in October. From the order of the brand factory, it is “slightly optimistic†for the first half of next year; LED lighting Next year will be even better, and the cooperation between Jingdian and Lite-On will be the best.
In the LED lighting layout strategy, Jingdian has adopted a strategic alliance with the big manufacturers, which is not the same as the backlight. The cooperation manufacturers include Delta Electronics, South Asia Optoelectronics, China Information Electronics and Lite-On. It is understood that Lite-On has signed a contract with the international lighting manufacturer, and the only chip that recognizes the crystal, Crystal and Lightbo together win in the LED lighting.
Jingdian Changzhou Plant Jingpin Optoelectronics opened its mass production last week. Li Bingjie just returned to Taiwan yesterday and immediately held a meeting for the urgent order in October. Li Bingjie said that the new LEDTV model to be launched next year will adopt a stricter specification, so it is a challenge for crystal power.
Li Bingjie said that since the order in October is not small, the yield adjustment will be more difficult. Since October, LEDTV orders have gradually warmed up. It is really necessary to have a large shipment. In February next year, after the Lunar New Year, it is expected that there will be a wave of shipments from February to May next year.
At present, it seems that the number in the first half of next year can be slightly optimistic. However, Li Bingjie also confessed that the price is relatively unsure.
The layout of crystal LED lighting has gradually entered the harvest. It is understood that Jingdian is also interested in attacking LED lighting at the same time. Because Guangbao has obtained OEM orders from international companies, it also allows Jingbao and Jingdian to jointly produce crystal products. Optoelectronics enjoy the order, the future Guangbao will move the LED lighting production base from Tianjin to Changzhou, and Jingpin Optoelectronics will provide the LED lighting crystals needed by Lite-On.
Li Bingjie stressed that the EU will completely ban incandescent lamps from next year. The development of LED lighting has its niche. The strategy of crystal power is to provide the light source needed for lighting.
Gear Reducer Motor is a small precision reducer, and the size and specification can be customized below 38mm. Shenzhen shun cheong electrical co., LTD. 15 years engaged in the design, development, manufacture Dc Gear Motor, products applicable to the smart home, widely used in intelligent robot voice interaction, children's education escort robot, intelligent sweeping machine robot, intelligent robot adaptability, independent motor, intelligent medical robot project.
Application field:
Method of use: the best stable in horizontal plane, installed on the gear reducer motor output shaft parts, cannot use a hammer to knock,knock prone to press into the gear reducer motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Gear reducer motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Gear reducer motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of gear reducer motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Gear Reducer Motor,Reducer Motor,Gear Reducer Stepper Motor,Dc Reducer Gear Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com