With the promotion of the “Ten Cities and Ten Thousand Cities†of the Ministry of Science and Technology and the “Ten Thousand Miles†LED Street Light Application Project of the Guangdong Provincial Government, more and more cities across the country claim to carry out energy-saving renovation of urban street lamps, replacing traditional street lamps with street lamps using LED light sources. . The large-scale use of LED street lights puts more stringent requirements on the performance of their core components. To this end, Zhenmingli Group successfully developed and mass-produced new batwing high-power LEDs through continuous innovation and extensive testing, mainly for outdoor lighting applications such as street lights, tunnel lights and garden lights.
The new product is uniquely modified by the lens of the LED, optically designed during the encapsulation process, lengthening its illumination angle, and achieving a light distribution of the batwing of 120°*60°, so that it can be applied to the street lamp without adding a lens or Reflective cup, to achieve the purpose of reducing luminous loss and saving costs. In addition, the optimized one-shot silicone lens not only achieves a light utilization rate of 90%. Moreover, the cost reduction of expensive LEDs further reduces the overall cost. The new products use high-efficiency high-power LED chips from abroad. Not only high luminous efficiency, but also excellent stability, the light decay is controlled within 3% of 3000 hours at room temperature of 25 °.
The advantages of NEONEON Batwing High Power LED are:
1. Improve the product's primary light distribution design and improve the luminous efficiency of the overall luminaire; at the same time, the ordinary Lambertian LED light source + lens or reflector can increase the light output rate by at least 10%-15%. Thereby improving the overall efficacy of the luminaire;
2. Saving costs and improving production efficiency; combined with the characteristics of outdoor lighting, one-time light distribution can meet the product demand, while saving the research and development and manufacturing costs of secondary light distribution components such as lenses and reflectors;
3. It can pass the reflow soldering process and adopt solder paste soldering method to improve heat conduction and improve production efficiency.
The 2009 Global Climate Summit in Copenhagen will be held soon, and the global warming issue will be the central issue of the summit. All parts of the world are actively working to reduce carbon dioxide emissions and curb further deterioration of warming. Zhenmingli Group will continue to increase the research and development of LED packaging technology, promote the concept of environmental protection and carbon reduction, and do its utmost to contribute to reducing carbon dioxide emissions.
The new product is uniquely modified by the lens of the LED, optically designed during the encapsulation process, lengthening its illumination angle, and achieving a light distribution of the batwing of 120°*60°, so that it can be applied to the street lamp without adding a lens or Reflective cup, to achieve the purpose of reducing luminous loss and saving costs. In addition, the optimized one-shot silicone lens not only achieves a light utilization rate of 90%. Moreover, the cost reduction of expensive LEDs further reduces the overall cost. The new products use high-efficiency high-power LED chips from abroad. Not only high luminous efficiency, but also excellent stability, the light decay is controlled within 3% of 3000 hours at room temperature of 25 °.
The advantages of NEONEON Batwing High Power LED are:
1. Improve the product's primary light distribution design and improve the luminous efficiency of the overall luminaire; at the same time, the ordinary Lambertian LED light source + lens or reflector can increase the light output rate by at least 10%-15%. Thereby improving the overall efficacy of the luminaire;
2. Saving costs and improving production efficiency; combined with the characteristics of outdoor lighting, one-time light distribution can meet the product demand, while saving the research and development and manufacturing costs of secondary light distribution components such as lenses and reflectors;
3. It can pass the reflow soldering process and adopt solder paste soldering method to improve heat conduction and improve production efficiency.
The 2009 Global Climate Summit in Copenhagen will be held soon, and the global warming issue will be the central issue of the summit. All parts of the world are actively working to reduce carbon dioxide emissions and curb further deterioration of warming. Zhenmingli Group will continue to increase the research and development of LED packaging technology, promote the concept of environmental protection and carbon reduction, and do its utmost to contribute to reducing carbon dioxide emissions.
Thunderbolt docking station
Thunderbolt Docking Station,Thunderbolt Plug Docking Station,Aluminum Docking Station,Dual Thunderbolt Docking Station
Shenzhen GuanChen Electronics Co., Ltd. , https://www.gcneotech.com