BIOS is the abbreviation of "Basic Input Output System", which translates to Chinese meaning "basic input and output system". It stores the most important basic input and output, system settings, self-test after boot, system self-start and Other programs, providing the lowest level and most direct hardware setup and control for the computer. Xiaobian here to share with you is about win7 into the bios settings interface.
Bois settings are the steps necessary to install the system, but recently there are a lot of netizens asking how to enter the bios settings in the windows7 home? In fact, how to enter the bios settings this problem is very simple to solve, then Xiaobian teaches everyone how to enter the bios settings, let's learn together.
First, the hotkey enters the BIOSDifferent hot motherboards, you can enter the BIOS by pressing the corresponding hotkey at the first time of booting. Different brands and different models of computers enter the BIOS with different hotkeys. Some give hints on the screen, some don't give hints, and several common BIOS setup programs are listed as follows:
In terms of notebooks, in addition to special models, generally follow the following methods:
HP (press F2 when starting and restarting)
SONY (press F2 when starting and restarting)
Dell (press F2 when starting and restarting)
Acer (press F2 when starting and restarting)
Toshiba (press ESC and press F1 when cold boot)
Compaq (press F10 when the flashing cursor appears in the upper right corner, or press F10 when booting)
Fujitsu (press F2 when starting and restarting)
Most domestic and Taiwanese brands (press F2 when booting and restarting) When the desktop computer enters the BIOS boot, please press the del button to enter the BIOS. These things are related to the motherboard manufacturer, which is generally determined by the motherboard.
Second, by reading the boot screen information, enter the BIOS.The first screen of the boot can bring us a lot of information. Let's take a look at it. The boot screen brings us information about entering the BIOS.
The above content is a tutorial for how to enter the bios settings for the netizens. Recently, many users are responding. After the win7 system is installed, it can't enter bois after booting. How to solve this problem? Let's take a look at the solution of win7 notebook boot can not enter bois.
Analysis of the reasons for not entering the bios interface:1. You didn't figure out the brand of your motherboard. The startup button was wrong.
2, memory detection for a long time at boot
Solution:1, the most important thing is to first figure out what the brand of the motherboard is, you can refer to the two pictures to enter the BIOS interface
(1) Press the specific start button when booting again to enter the BIOS setup program. Different types of machines enter the BIOS setup program with different start buttons, some will give hints on the screen, and some will not give a prompt.
(2) u disk boot allows us to temporarily boot the USB flash drive without using other disk media. Different brands of computer motherboard BIOS startup shortcuts are also different, several different brands commonly used startup hotkeys as shown:
In addition, memory monitoring is also a necessary process for computer startup. In the bois settings, the "Quick Power On SeLf Test" item is not set to "Enable", so the memory will be detected 3 times, set this option to "Disable", and then save and exit.
2, memory detection is a necessary process for the computer to start.
The "Quick Power On Self Test" item is not set to "Enable" in the BIOS settings, so the memory will be self-tested 3 times, set this option to "Disable", and then save and exit.
Nowadays, the system fee reloading method is varied, and it tends to be more "foolish". In the face of so many reinstallation system software, we have to distinguish which system reinstall software is the best. Recommend a very good reloading system software for everyone - System Home One-Click Reload Master. We can use it to reload win8 system, win7 system, XP system with one button.
How to enter the BIOS of a normal desktop PC:1. Award BIOS - press the "Del" button;
2, AMI BIOS - press the "Del" or "ESC" button;
3. Phoenix BIOS - press the "F2" button;
Other brands enter the BIOS:1, hp - press the f2 button when starting;
2, sony - press the f2 key when starting;
3, dell - press the f2 button when starting;
4, acer - press the f2 button when starting;
5, toshiba —— press esc and press f1 when cold booting;
6, fujitsu - press the f2 button when starting;
7, ibm - cold boot press f1, some new models can be activated when restarting press the f1 button;
8, hp compaq —— press f10 when the flashing cursor appears in the upper right corner, or press f10 when booting;
9. Most domestic and Taiwanese brands - press the f2 key when starting and restarting.
b
Icom mobile radio,Hytera Digital Mobile Radio,Radio Hytera Md785,Hytera Dmr Mobile Radio
Guangzhou Etmy Technology Co., Ltd. , https://www.digitaltalkie.com