The solution is based on Infineon's control chip. The sensor detects the magnitude and direction of the torque or angle generated by the steering wheel during the steering operation, and converts the required information into a digital signal input ECU, which is then calculated by the ECU. A torque that is adapted to the driving conditions, and finally a command to drive the motor to work, the output torque of the motor is assisted by the action of the transmission.
Program overview:
Electric Power Steering (EPS) is a power steering system that directly relies on the motor to provide auxiliary torque, as shown in the figure.
EPS structure
The controller selects Infineon's xc8xx, the steering wheel torque sensor uses Infineon's TLE4997, and the steering wheel angle sensor uses two Infineon's TLE5011 and xc8xx.
Main technical indicators of the controller:
1, working temperature -40 ° C - +105 ° C
2, working voltage 9-16V
3, the maximum allowable current: 75A
4, the minimum controllable current 0.1A
5, the minimum torque output 0.1Nm
Torque sensor specifications:
1. Measurement range: ±4°
2, accuracy: full range 1%
3, corner resolution: 0.01 °
4, working temperature: -40 - +125 ° C
Steering wheel angle sensor:
1. Measurement range: -720-720°
2, accuracy: ± 2.5 °
3, corner resolution: 0.1 °
4, working temperature: -40 - +85 ° C
The driving energy of electric vehicles is mainly power batteries, or mainly driven by the engine. The steering device cannot adopt the traditional hydraulic driving method driven by the engine, but needs to use the motor to assist the steering. This is to adopt electric power steering. It is a system that controls the high-performance motor based on the mechanical steering system to assist the driver in steering operation. At present, the electric steering technology has developed rapidly, and technologies such as “active steering†and “line transmission steering†have emerged. For example, the currently used “automatic parking assist†system is an active steering application, which does not need to wait for the driver to operate. The steering wheel sends a signal, and the steering ECU will actively issue commands to control the steering of the vehicle according to the need of parking, and realize automatic position finding parking, which is applied in the unmanned vehicle and the automatic stable driving track.
Cr12 Soldering lron,high strength and wear resistance.The cut surface of DIN Rail is smooth and free of burrs.With the 50cm lengthgraduated scale,cutting is accurate.The bezelcan be rotated at 90°,making cutting more convenient.Locking mechanism,humanized design, concenient for storage and transportation.
Crimp Tool WKC8 SeriesSuitable for VE ferrulesWKC8 10-4 Square shape after crimpedWKC8 6-6 Hexagon shape after crimped
Cutting plier ToolSuitable for cutting FBS, JEB bridges
Automatic wire stripping and crimping machineProduct introduction
This model is designed for crimping tube terminal, suitable for wires with cross section 0.5-4mm².Thedesktop type machine is space saving,Theproductionof wiring harness has strong mobility, vibration plate feeding, automatic trigger start,stripping Integratedoperation of stripping wire, insert into ferrules andcrimping is convenient and quick.It is suitable forcrimping, stripping variety of single-grain tubeterminals to wires at one time.
Touch man-machine interface numerical control operation
Stripping through the terminal without reverse wire
Horizontal crimping from left and right
Fool-proof design automatically triggers to start
Holder Bracket For Din Rail,Electric Din Rail Holder,Standard Din Rail Accessories,Din Rai Power Supply
Wonke Electric CO.,Ltd. , https://www.wkdq-electric.com