Freescale night vision, smart headlight control and lane keeping system solutions

The camera system in an advanced driver assistance system can also display the front and rear of the car on the screen at night. It analyzes video content for lane keeping and long/short head light control.

An image sensor provides the input video frame to a single-core or dual-core architecture and is optimized by DSP for image filtering and for edge detection and bright spot detection. Additional system requirements include an appropriate communication interface, an integrated DRAM interface for fast access to external memory and embedded flash memory, to implement a cost-effective system.



Freescale's night vision, smart headlight control and lane keeping system block diagram

Products for camera systems

This article refers to the address: http://

Product Series

product

Description

32-bit MCU

• MPC56xx series

• Major single and dual core controllers for video processing

Analog and mixed signal integrated circuits

• MC33742, MC33910, MC33911, MC33912,

• MC33902

• SBC



• CAN/LIN network

Available tools

Evaluation Board, Calibration Solution, Reference Design, Software Library, AUTOSAR


Freescale's tire pressure monitoring system solution

The Tire Pressure Monitoring System (TPMS) is a new standard designed to improve vehicle safety. Freescale uses its advanced integration technology to supply TPMS solutions that provide real-time tire pressure detection and warn drivers of abnormal tire expansion. Freescale's TPMS products are designed to meet the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) 138 and automotive manufacturers worldwide.

Freescale's tire pressure monitoring uses a pressure sensor, an 8-bit MCU, a radio frequency (RF) transmitter, and a dual-axis accelerometer with X-axis and Z-axis. This unit is mounted on a module on the rim to provide independent real-time tire pressure measurements for each tire, which can be sent to the vehicle dashboard for prompt notification to the driver.



Freescale's tire pressure monitoring system block diagram

Products for tire pressure monitoring systems

Product Series

product

Description

sensor

• XY8500

• XY8600

• Includes a capacitive pressure and temperature sensor, an 8-bit MCU, RF transmitter and a dual-axis accelerometer



Freescale's body control modules and central gateway solutions

The Central Body Control Module (BCM) is the primary hub for main vehicle body functions such as interior and exterior lighting, safety and access control, door and seat comfort and other convenient controls.

Freescale's leading Power Architecture-based 32-bit and S12- and 16-bit MCU families are targeted at a wide range of BCM applications. SBS integrates pressure regulation with CAN or LIN physical interfaces in a single package. The H-bridge driver and a series of high-side switches (eXtreme switches) drive high current loads and replace relays.

The gateway serves as an information bridge for a variety of in-vehicle communications, including Ethernet, FlexRayTM, CAN, LIN, and MOST protocols. It is also used as a central diagnostic interface for cars.



Freescale's body control module and central gateway block diagram

Products for body control modules and central gateways

Product Series

product

Description

32-bit MCU

• MPC551x, MPC560xB/C, MPC5668G

• Primary controller for signal/transmitter input/output

• Available with e200 Power Architecture and various features based on S12X devices

• Up to 2MB of memory can be used

• Single and dual core MCUs

• CAN/LIN, FlexRayTM network

16-bit MCU

• S12XE

• S12XS

• S12P

• Primary controller for signal/transmitter input/output

• Available with e200 Power Architecture and various features based on S12X devices

• Up to 2MB of memory can be used

• Single and dual core MCUs

• CAN/LIN, FlexRayTM network

8-bit MCU

• S08D• S08SG/SL

• Watchdog function

Analog and mixed signal integrated circuits

• MC33904, MC33905, MC33910, MC33911, MC33912,

• MM908E621, MM908E622, MM908E624, MM908E625, MM912F634,

• MC33661, MC33897

• SBC,



• Individually packaged door, window, rear view and seating solutions, IDC



• CAN/LIN network

Available tools

Evaluation Board, Calibration Solution, Reference Design, Software Library, AUTOSAR

CL-2H Copper Connecting Terminals

Our company specializes in the production and sales of all kinds of terminals, copper terminals, nose wire ears, cold pressed terminals, copper joints, but also according to customer requirements for customization and production, our raw materials are produced and sold by ourselves, we have their own raw materials processing plant, high purity T2 copper, quality and quantity, come to me to order it!

CL-2H Copper Connecting Terminals

Taixing Longyi Terminals Co.,Ltd. , https://www.longyicopperterminals.com

Posted on