The MAX19997A dual-channel down-conversion mixer is a general-purpose, highly integrated, and versatile down-converter that provides high linearity performance and low noise figure for 1800MHz to 2900MHz base station applications. The MAX19997A fully supports the low-end and high-end LO injection architectures in WiMAX â„¢, LTE, WCS, and MMDS wireless infrastructure applications from 2300MHz to 2900MHz. The low-end configuration provides 8.7dB gain, + 24dBm input IP3, and 10.3dB NF. It can provide 8.7dB gain, + 24dBm input IP3 and 10.4dB NF. An additional tuning element (bypass inductor) is added to each RF port to further extend the range of high-end LO injection architecture down to 1800MHz.
The device integrates an unbalanced transformer at the RF and LO ports. In addition, the device includes an LO buffer, two double balanced mixers, and a pair of differential IF output amplifiers. The MAX19997A requires a LO drive with a typical value of 0dBm, and the power supply current is guaranteed to be less than 420mA to achieve the expected linearity index.
The MAX19997A is available in a compact 6mm x 6mm, 36-pin, thin QFN lead-free package with exposed pad. In the extended temperature range of TC = -40 ° C to + 85 ° C, electrical performance is guaranteed.
Key features
1800MHz to 2900MHz RF frequency range
1950MHz to 3400MHz LO frequency range
50MHz to 500MHz IF frequency range
Support low-end and high-end LO injection
8.7dB conversion gain
+ 24dBm input IP3
10.3dB noise figure
+ 11.3dBm input 1dB compression point
2 x 2 spurious suppression at 70dBc (typical) at PRF = -10dBm
Dual channels are ideal for diversity receiver applications
Integrated LO buffer
Internal LO and RF baluns support single-ended input
-3dBm to + 3dBm low LO drive
Pin compatible with MAX19999 3000MHz to 4000MHz mixer
Pins are similar to MAX9995 / MAX9995A and MAX19995 / MAX19995A 1700MHz to 2200MHz mixers and MAX9985 / MAX9985A and MAX19985 / MAX19985A 700MHz to 1000MHz mixers
42dB channel-to-channel isolation
Use + 5.0V or + 3.3V single power supply
External current setting resistor allows compromise selection of mixer's low power / low performance operating mode
Welcome to reprint, this article comes from the electronic enthusiast network (http: //)
Dongguan Guancheng Precision Plastic Manufacturing Co., Ltd. , https://www.dpowerchargers.com