Recently, professors from the China National 863 Program and Fudan University's Department of Light Source and Lighting Engineering visited Zhejiang Xintiantian Optoelectronics Technology Co., Ltd., which said it will set up a high-power lighting engineering R&D center to develop and produce LED light source products on a large scale. Further exploration of the LED light source industry.
Zhejiang Xintiantian Optoelectronics Technology Co., Ltd. specializes in the production and sales of LED lights, which was founded in September 2010. Its LED lighting products are mainly used for lighting and high-power lighting. The products are mainly sold to some light factories in Taizhou. Some of the indoor and outdoor lighting fixtures use LED light source products produced by their own company.
The company expects to generate 250 million yuan in output value in 2011, and will apply for national high-tech enterprises, and strive to complete and declare more than three technical patents by the end of 2011.
The single groove blanking process of motor blanking is a kind of blanking process relative to double blanking. Motor fixed, Rotor Core punching using single groove punching process, its mold design, manufacturing are relatively simple, suitable for small batch, variety of production, has the characteristics of low cost, fast change. With the development of advanced punching machine, production efficiency continues to improve, the single punching process is also developing rapidly. For the large motor, because of the cost of the duplex die and the equipment capacity, the single groove is also used. Another advantage of single groove punching is the consistency of groove size. Compound die is the same punch, stator or rotor groove completed at one time. How many slots correspond to the same number of punches, punch size to achieve complete has always been some difficulties: single slot punching is by the same punch to complete all the slots, groove consistency is better.
Stator and rotor laminations are an important part of motors and generators. For large-size and small-batch punching sheets, we usually use the notching method to produce them. The advantages of notching are that the cost of the notching die is low and the production cycle of the notching die is short. It is suitable for producing large size laminations, usually the outer diameter is from 500mm-1250mm. The slot size is more accurate than Laser Cutting.
Stator And Rotor Lamination By Single Notching,Stator Core Laminations,Generator Stator Laminations,Electric Motor Rotor Laminations
Henan Yongrong Power Co., Ltd , https://www.hnyongrongglobal.com