ST-Ericsson leads the TD chip market with more than 6.5 million shipments
Thierry TIngaud, Global Vice President of ST-Ericsson, said, "TD-SCDMA is very important to ST-Ericsson. Last year, our wholly-owned subsidiary T3G, which focuses on TD mobile phone chip development, has shipped more than 6.5 million pieces. Temporarily lead the global TD mobile phone chip market. "
In February 2009, Sweden Ericsson and STMicroelectronics each held 50% of their shares and established ST-Ericsson, a joint venture company focused on mobile phone and wireless communication chip design. ST-Ericsson is also the second largest mobile phone and communication chip design (IC) manufacturer in the world, second only to Qualcomm.
Share market with MediaTek
Statistics from the Ministry of Industry and Information Technology show that last year TD chip shipments exceeded 12 million. Because Qualcomm has no clear TD chip plan, in the TD mobile phone chip market last year, ST-Ericsson's wholly-owned subsidiaries Tianqi (T3G) and MediaTek (MTK) gained the majority of market share.
On the 2nd of this month, MediaTek also said in its investor meeting that last year TD chip shipments exceeded 6 million, but MediaTek does not provide TD chips to mobile phone manufacturers alone, but through cooperation with Datang Telecom's Lianxin Technology. R & D and design. However, the choice of MediaTek chip solutions is dominated by domestic mobile phone manufacturers.
Thierry TIngaud said, "Nokia, Samsung and Motorola have all launched TD phones using Tianqi chip solutions, and we are also working with other mobile phone manufacturers to launch more TD phones."
China Mobile has made it clear that it will increase the promotion of TD this year. At present, China Mobile's TD users have just exceeded 5 million. By the end of 2010, China Mobile plans to expand TD users to 50 million. Industry laws show that chip shipments are generally 2-3 times that of mobile phones, which also means that the TD chip market in 2010 will definitely exceed 100 million pieces, and may even approach 200 million pieces.
Looking forward to Barcelona MWC2010
"In addition to TD-SCDMA, ST-Ericsson is also developing other communication chips such as GSM and WCDMA. Last month we also announced that we will launch the LTE chip plan globally. We will showcase our full range of products at the Barcelona Communication Exhibition a few days later," Thierry TIngaud said.
On February 15th, the annual global mobile communications conference (MWC2010) in the global communications industry is about to kick off in the Spanish seaside city of Barcelona.
Thierry TIngaud said, “MWC is the only industry event that can meet global analysts, journalists and partners every year. At this year ’s MWC, we will release many new products, including chip solutions that support multiple communication technology formats. For example, the integrated solution of integrating GPS, Wi-Fi and Bluetooth in the TD chip, of course, there is also a chip of 65 nanometer process. "
Bare aluminium conductors are electrical conductors made from pure aluminium. They are used in various electrical applications, including overhead power transmission and distribution lines.
Bare aluminium conductors have several advantages over other types of conductors. Firstly, aluminium is lighter than copper, which makes it easier to handle and install. This is particularly important for overhead power lines, where the weight of the conductor can have a significant impact on the cost and feasibility of the project.
Secondly, aluminium has a higher conductivity-to-weight ratio than copper. This means that for a given weight, aluminium conductors can carry more current than copper conductors. This makes them more efficient in terms of power transmission.
However, bare aluminium conductors also have some disadvantages. One major drawback is their lower mechanical strength compared to copper conductors. This makes them more susceptible to sagging and stretching under the weight of their own span, especially in hot weather conditions. To address this issue, aluminium conductors are often reinforced with steel strands to improve their mechanical strength.
Another disadvantage is that aluminium has a higher resistance than copper, which can result in higher power losses and voltage drops. To mitigate this, aluminium conductors are typically designed with larger cross-sectional areas compared to copper conductors to compensate for the higher resistance.
Overall, bare aluminium conductors are widely used in electrical power transmission and distribution systems due to their cost-effectiveness, lightweight, and high conductivity-to-weight ratio. However, careful design and installation considerations are necessary to ensure their mechanical strength and minimize power losses.
Aluminium Bare Stranded Conductors,Bare Aluminium Conductors,Overhead Transmission Line, Transmission line Bare Aluminium Conductors
Ruitian Cable CO.,LTD. , https://www.rtpowercable.com